Case Studies
Posted on : 17-09-2010
Product developed for Medical equipment
Background
The Customer is a major multinational company engaged in manufacture of Medical equipments was interested in developing current sensors for the critical medical imaging equipment for their worldwide market.
Challenge
The customer had very specific parameters to be met as per their stringent current measurement and control application as follows:
ELECTROHMS offered the customer a Specially designed current sensor for medical electronics systems, that can also be used in any health care systems for an accurate and precise measurement.
Background
The Customer is a major multinational company engaged in manufacture of Medical equipments was interested in developing current sensors for the critical medical imaging equipment for their worldwide market.
Challenge
The customer had very specific parameters to be met as per their stringent current measurement and control application as follows:
- Supreme accuracy +/- 0.5% & linearity +/- 0.1%
- High level of immunity against external electromagnetic interference.
- Non contact measurement, with galvanic isolation.
- Nominal current rating 200A
- Measuring current range ±300A.
- Frequency band width DC to 150kHz
- Isolation voltage 6.0kV
ELECTROHMS offered the customer a Specially designed current sensor for medical electronics systems, that can also be used in any health care systems for an accurate and precise measurement.
Posted on : 17-09-2010
Quality, On Time Delivery and Cost reduction for critical multiple circuit monitoring
Background
The customer is a global leader in the development and supply of electrical equipment. Due to the fact that their products handle critical applications, the requirements for quality and on time delivery were extremely high. There is a great need for the customer’s products on the market and a reliable supplier with quick ramp of production was essential
Challenge
The customer needed a partner for supplying products as follows:
ELECTROHMS developed the prototype in a very short time.
Background
The customer is a global leader in the development and supply of electrical equipment. Due to the fact that their products handle critical applications, the requirements for quality and on time delivery were extremely high. There is a great need for the customer’s products on the market and a reliable supplier with quick ramp of production was essential
Challenge
The customer needed a partner for supplying products as follows:
- Manufactured according to their specification.
- On Time Delivery as per schedules committed
- Attention to cost reduction for a competitive market.
- Fast development and production program involving many components
ELECTROHMS developed the prototype in a very short time.
- Pilot lots were dispatched for test and approval as per schedule.
- Good sourcing and coordination between various suppliers was ensured.
- Production ramp up achieved ahead of schedule by the team formed specifically for this development within ELECTROHMS.
Posted on : 17-09-2010
Design and manufacture of Potential Transformers
Background
The customer - a global leader in electrical equipment - required rapid development of quality products to meet global standards.
Challenge
The customer needed a reliable supplier developing potential transformers as follows:
ELECTROHMS developed the prototype in a very short time.
Background
The customer - a global leader in electrical equipment - required rapid development of quality products to meet global standards.
Challenge
The customer needed a reliable supplier developing potential transformers as follows:
- Low - Phase error, highly linear and accurate
- Design a housing for three phase application
- Product to be tested for reliability and performance
- Fast development and production program.
ELECTROHMS developed the prototype in a very short time.
- Pilot lots were dispatched for test and approval as per schedule.
- Good sourcing and coordination between various suppliers was ensured.
- Production ramp up achieved ahead of schedule by the team formed specifically for this development within ELECTROHMS.
