Back

CUSTOMER LOGIN    
 
DC TOLERANT CURRENT TRANSFORMERS
Product Code
IP(Arms)
Turns Ratio
Rb(Ohms)
DCR(Ohms)
AE(%)
PE(Deg)
Application
Secondary Termination
0.250 - 20.000
1:3500
22.0
215-265
0.5
1.75
DC TOLERANT
fly leads
0.250 - 60.000
1:2500
12.5
52-60
0.5
4.0
DC TOLERANT
fly leads
0.500 - 60.000
1 : 7000
47.0
395 - 505
0.3
1.2
DC TOLERANT
Flyleads
0.500 - 60.000
1:7000
47.0
395-505
0.3
1.2
DC TOLERANT
fly leads
0.500 - 60.000
1:7000
47.0
395-505
0.3
1.2
DC TOLERANT
fly leads
1.000 - 100.000
1:2500
7.5
37-47
0.5
4.5
DC TOLERANT
PC mountable
1.000 - 120.000
1:2500
6.25
22-27
0.5
4.0
DC TOLERANT
fly leads
 

Nomenclature
Ip (Arms) : Operating primary current range in A rms
Turns ratio : Recommended ratio of primary turns to secondary turns
Rb : Burden resistor connected across the secondary winding
DCR : Secondary winding resistance
AE (%) : % Max amplitude error in the operating primary current range
PE (Deg) : Max phase error in the operating primary current range in Degrees
Secondarytermination : PC mountable corresponds to secondary winding terminated on pins which are directly mounted on a printed circuit board. In the case of Fly leads, the secondary winding are terminated on to hook up wire.
Last Updated on 10/11/2005

Copyright © electrohms.com